rake angle

Through the graphics processing of micro protrusion topography of wheel, the grain protrusion height, grain protrusion volume, grain rake angle and clearance angle were modeled.

通过砂轮微观出刃形貌的图形化处理，建立磨粒出刃高度、出刃体积、磨粒切削前角和后角等特征参数模式。

互联网摘选

There is a special way of design of carbon alloy slotting tool which has minus rake angle to increase the ability of resisting the tooth edge collapse.

为提高硬质合金插齿刀的抗崩刃能力，需要采用负前角的特殊设计；

互联网摘选

Edge Shape Error Analysis and Modification Calculation of the Positive rake angle slotting tool

正前角插齿刀刃形误差分析及修正计算

互联网摘选

The calculating formulae of the chip-flow angle and the chip-flow rake angle are given.

给出了流屑角和流屑前角的计算公式.

互联网摘选

Profile Design and Accuracy Analysis on Gear Hob of Front Rake Angle

正前角齿轮滚刀的齿形设计和精度分析

互联网摘选

The slotting tool with isometric profile cylinder hole is designed. The average radius, the rake angle, the relief angle and the space curve of the edge are analyzed and researched.

对插削等距型面孔的插刀进行了设计，对其平均半径、前角、后角、刀刃的空间曲线作了分析和研究。

互联网摘选

Finite element analysis of grinding chip formation of single abrasive grain with negative rake angle

负前角磨粒磨削过程磨屑形成的有限元仿真分析

互联网摘选

Analysis of Rake Angle of Vertical Slotting Cutter

直齿插齿刀前角的理论分析

互联网摘选

Effects of knife rake angle on rheological properties of the flakes of poplar and oak wood

刨刀角度对杨木和柞木刨片流变性能的影响

互联网摘选

Studies on the effects of chip thickness, knife rake angle, and wood moisture content on the cutting resistance of 11 coniferous woods

11种针叶树材的切削厚度、刀具前角和木材含水率对切削阻力影响的研究

互联网摘选

Although big roof, incline plane, long overhang eaves and high rake angle are characteristics of Chinese ancient palatial architecture, the lips and beasts are parts sine qua non in roof decoration.

大屋顶、斜坡面、深出檐、高翘角是中国古代宫殿建筑的特点，而脊吻、走兽又是屋顶装饰不可缺少的部件。

互联网摘选

Influence of Rake Angle of Spherical Milling Cutter on Cutting Capability

球形铣刀前角对切削性能的影响

互联网摘选

Measure rake angle 、 relief angle and knife gap angle. Discuss the influence to the measurement result caused by the error of the circle center.

对前后角、侧隙角等进行了测量，讨论了回转圆心误差对实际测量的影响。

互联网摘选

The results show that average values of grain protrusion height, grain protrusion volume and clearance angle of truncated grinding wheel are smaller than the ones of ideal grinding wheel, but the grain rake angle of truncated grinding wheel is larger.

结果表明，GT修齐的砂轮与理想砂轮相比，磨粒出刃高度、出刃体积和磨粒后角的平均值要小，但是，磨粒切削负前角要大。

互联网摘选

The earthquake rake angle is derived based on geologically determined fault setting parameters and seismically estimated orientation of regional tectonic stresses.

根据地质调查得到的地震断层走向、倾角以及本地区的构造应力场方向估计滑动角。

互联网摘选

Taper ball-nose end mill; Rake angle; Wheel wear; Simulation;

锥度球头立铣刀；前角；砂轮磨损；仿真；

互联网摘选

Influence of Rake Angle of Inclined Edge on Shearing Effect of Die of Inclined Edge

斜刃倾角对斜刃剪切效果的影响

互联网摘选

Side rake angle is determined by rake angle and back declination angle and the position of the cutting point in the cutter.

齿前角、侧转角及切削齿齿刃上工作点的位置，决定了该点工作时的前倾角。

互联网摘选

The results show that grain protrusion height, grain protrusion volume, and clearance angle are larger compared with the factory wheel, but the grain rake angle is smaller, which is different from the truncation mechanizations of finer# 270 diamond grinding wheel.

结果表明，与出厂砂轮相比，镜面加工砂轮的磨粒出刃高度、出刃体积和出刃后角要大，但出刃前角减小，这与微细270金刚石砂轮的GT修齐机理不一致。

互联网摘选